IES-1000 User’s Guide
7-8 ADSL Commands
7.5.10 List Port Command
Syntax:
192.168.1.1 adsl> list port <port number>
where
<port number> = A port number, from 1 to 8.
The list port command shows the configured maximum upstream/downstream rates, the mode (or standard),
and enable/disable state of an individual ADSL port.
7.5.11 List Ports Command
Syntax:
192.168.1.1 adsl> list ports
The list ports command shows the configured maximum rates, modes and states of all ADSL ports.
7.5.12 Set Profile Command
Syntax:
192.168.1.1 adsl> set profile <name> <atur max rate > <atuc max rate> [<atur
...> <atuc ...>]
<atux ...> = <target margin> <min margin> <max margin> <min rate>
where
<name> =
The name of the profile (up to 32 characters).
<atur max rate> =
The maximum ADSL upstream transmission rate.
<atuc max rate> =
The maximum ADSL downstream transmission rate.
<atur target margin> =
The target ADSL upstream signal/noise margin (0-31db).
<atuc target margin> =
The target ADSL downstream signal/noise margin (0-31db).
<atur min margin> =
The minimum acceptable ADSL upstream signal/noise margin (0-
31db).
<atuc min margin> =
The minimum acceptable ADSL downstream signal/noise margin (0-
31db).
<atur max margin> =
The maximum acceptable ADSL upstream signal/noise margin (0-
31db).
<atuc max margin> =
The maximum acceptable ADSL downstream signal/noise margin (0-
31db).
<atur min rate> =
The minimum ADSL upstream transmission rate in Kbps.
<atuc min rate> =
The minimum ADSL downstream transmission rate in Kbps.
