A SERVICE OF

logo

Open as PDF
next previous
VES-1000 Series Ethernet Switch
Switch-Related Commands 13-13
Figure 13-18 STP Counter Display Example
Refer to Table 9-C for information on the fields displayed.
13.8 Switch Driver Commands
The following table shows the switch driver commands supported by the VES-1000 Series switch.
Table 13-G Switch Driver Commands
COMMAND DESCRIPTION
switch driver count disp This command shows the switch counter.
switch driver count clear This command clears the switch counters.
13.8.1 Display Switch Driver Counter Command
sw driver count disp
Bridge Info:
(1) DesignatedRootBridgeID:
(2) RootPathCost:
(3) RootPortID:
(4) MaxAge:
(5) HelloTime:
(6) ForwardDelay:
(7) BridgeID:
(8) BMaxAge:
(9) BHelloTime:
(10) BForwardDelay:
(11) TopologyCgangeDetected:
(12) TopologyChange:
(13) TopologyChangeTime:
(14) HoldTime:
8000-00a0c5012345
0
0x0000
5120 (1/256 sec)
512 (1/256 sec)
3840 (1/256 sec)
8000-00a0c5012345
5120 (1/256 sec)
512 (1/256 sec)
3840 (1/256 sec)
0
0
8960 (1/256 sec)
256 (1/256 sec)
Port_0 Info:
(1) Port ID:
(2) Port State:
(3) Enable:
(4) PathCost:
(5) Designated Root:
(6) Designated Cost:
(7) Designated Bridge:
(8) Designated Port:
(9) TopologyChangeAcknowledge:
(10)ConfigPending:
(11) ForwardTransition:
0x8000
4
1
100
8000-00a0c5012345
0
8000-00a0c5012345
0x8000
0
0
1
STP Counter:
SendConfCount:
SendTCNCount:
RecConfigBPDU:
RecTCNBPDU:
262
0
0
0