A SERVICE OF

logo

3.5 Specifying a Zoom Setting
3
3-17
Basic Copy Operations Chapter 3
To specify different vertical and horizontal scaling proportions (X/Y Zoom
settings)
1 Touch [Zoom].
A screen appears, showing the available Zoom settings.
2 Touch [Manual Zoom].
3 Touch [X/Y Zoom].
The X/Y Zoom screen appears.
4 Make sure that [X] is
selected.
5 Using the keypad, type
in the desired length of
side X (between ×0.250
and ×4.000).
The entered zoom ratio
is displayed.
6 Touch [Y].
7 Using the keypad, type in the desired length of side Y (between ×0.250 and
×4.000).
The entered zoom ratio is displayed.
8 Touch [Enter].
The entered zoom ratio is applied.