A SERVICE OF

logo

Open as PDF
next previous
10.8 Administrator Settings
10
10-43
Utility Mode Operations Chapter 10
Setting the “User Authentication” Function
This function is used to select whether user authentication is required in order to
enter Scan mode or Box mode after the [Scan] key or the [Box] key is pressed.
In addition, user authentication can be performed with Active Directory or NTLM.
(The default setting is “No”.)
✎
Reference
For details on the Scan mode and Box mode, refer to the KM-C2230 Printer
Controller User’s Guide.
✎
Additional Information
Active Directory is available only with Windows 2000 Server.
NTLM is available only with Windows NT Server.
1 Press the [Utility] key.
2 Touch [Admin. Mode].
3 Using the keypad, type in the administrator code.
❍ Touch [Enter].
4 Touch [Admin. Set.].
5 Touch [2/4].
6 Touch [User
Authentication].