A SERVICE OF

logo

Open as PDF
next previous
10
10.10 Specifying Expert User Mode Functions
10-82
Utility Mode Operations Chapter 10
Setting the “PRT Area (Left Margin)” Function
This function is used to adjust the printing position at the left edge of the paper (in
comparison to the paper feed direction).
The left margin of the print area can be adjusted for each paper drawer.
✎
Condition
The left margin of the print area is adjusted during manufacturing of the
machine. Normally, the left margin will not need to be adjusted.
The procedure with 11 × 17-size paper loaded into the 1st drawer is described
below.
1 Load 11 × 17-size paper into the 1st drawer.
2 Press the [Utility] key.
3 Touch [Admin. Mode].
4 Using the keypad, type in the administrator code.
❍ Touch [Enter].
5 Touch [Expert User Mode].
6 Touch [PRT Area (Left
Margin)].