10.11 Supervising Machine Use (Volume Track (E.K.C.) Functions)
10
10-95
Utility Mode Operations Chapter 10
✎
Additional Information
If the “Color” parameter is set to “Prohibit”, full-color, 2-color and monocolor
printing are not possible. In addition, the “Auto Color”, “Full Color”, “2 Color”
and “Single Color” Color settings from the Basic screen are also not
available.
If the “Black” parameter is set to “Prohibit”, black-and-white printing is not
possible. In addition, the “Auto Color” and “Black” Color settings from the
Basic screen are also not available.
If both the “Color” and “Black” parameters are set to “Prohibit”, no printing is
possible. In this case, even if the account number and its access number are
correctly entered, the Basic screen is not displayed.
12 Touch [Upper Limit Copy + Print].
The Upper Limit Copy + Print screen appears.
13 Touch either [Total] or
[Color/Black].
14 Specify whether or not a limit will be applied to the number of prints allowed.
If “Yes” is selected, touch the key beside [Yes], and then use the keypad to
specify the limit for the number of prints allowed. The maximum number of prints
allowed can be set between 1 and 999,999.
✎
Additional Information
If “Total” is set to “Yes”, “Yes” cannot be selected for “Color/Black”. In
addition, with “Color/Black” selected, the maximum number of prints cannot
be specified.
If either the “Color” or the “Black” parameter or both parameters for “Color/
Black” are set to “Yes”, “Yes” cannot be selected for “Total”. In addition, with
“Total” selected, the maximum number of prints cannot be specified.
