3
3.4 Selecting Output Settings
3-8
Basic Copy Operations Chapter 3
3.4 Selecting Output Settings
Various settings for sorting and finishing copies are available.
✎
Reference
The Output settings can be used together with other functions. For details, refer
to the “Function Combination Table” on page 14-25.
The following copy sorting and finishing methods are available.
✎
Condition
The “1 Staple” and “2 Staples” settings are available only if the optional finisher
DF-626 is installed.
The “Hole-Punch” setting is available only if the punch kit is attached to the
optional finisher DF-626.
The “1 Staple” setting is available only if the optional finisher DF-621 is installed.
Non Sorting (“Non Sort” Setting)
The copies are fed out and stacked on top of each other as they are printed.
Sorting (“Sort” Setting)
The copies are automatically divided into separate sets with each set containing a
copy of each page.
✎
Additional Information
The machine can be set to automatically select the “Sort” or “Non Sort” setting
according to the number of pages in the document when it is loaded into the
reverse automatic document feeder.
If the “Intelligent Sorting” function is set to “Yes”, the “Non Sort” setting is
automatically selected if the document consists of only one page, and the “Sort”
setting is automatically selected if the document consists of 2 or more pages.
For details, refer to “Setting the “Intelligent Sorting” Function” on page 10-19.
