6
6.4 Interrupting a Copy Job (Interrupt Mode)
6-8
Additional Copy Operations Chapter 6
6.4 Interrupting a Copy Job (Interrupt Mode)
The copy job being printed can be interrupted.
This is useful for pausing the current copy job in order to make a quick copy of a
different document.
✎
Reference
For details on interrupting a copy job when printing of the current job is finished
(without interrupting the copy job being printed), refer to “Increase Priority
Screen” on page 8-16.
✎
Hint
Some copy functions cannot be interrupted.
In addition, certain functions cannot be set if this machine is in Interrupt mode.
For details, refer to the “Function Combination Table” on page 14-25.
To interrupt copying
1 Press the [Interrupt] key while a
copy job is being printed.
The indicator on the [Interrupt]
key lights up.
❍ The message “Now in
Interrupt mode.” appears.
(At this point, printing of the
job before the interruption
continues.)
❍ The copy settings return to
their defaults.
(The copy settings for the job
before the interruption and the remaining number of copies are recorded.)
❍ If no operation is performed for the specified length of time after the
[Interrupt] key is pressed, the Interrupt mode is automatically canceled. The
length of time until the Interrupt mode is canceled is the same length of time
until the auto panel reset operation is performed. For details on specifying
the time for the auto panel reset operation, refer to “Setting the “Panel Reset
Timer” Function” on page 10-61.
2 Position the document(s) to be copied.
