3
3.6 Selecting a Paper/Size Setting
3-18
Basic Copy Operations Chapter 3
3.6 Selecting a Paper/Size Setting
The paper used for making copies can be selected.
The paper source can be selected in any of the following methods.
Automatic Paper Selection (“Auto Paper Select” Setting)
The most appropriate paper size is automatically selected based on the size of the
loaded document and the specified zoom ratio.
However, if the paper in a drawer is specified as special paper, the paper in that
drawer cannot be selected with the “Auto Paper Select” setting.
✎
Additional Information
If the paper in a drawer is specified as special paper, the paper in that drawer is
not automatically selected with the “Auto Paper Select” setting. The “Paper
Type Select” function is useful if special paper is loaded into a paper drawer.
For details, refer to “Setting the “Paper Type Select” Function” on page 10-21.
Manual Paper Selection
The drawer containing the appropriate paper that you wish to use can be selected
for copying.
Bypass Tray Selection (Bypass Setting)
Copies are produced using paper loaded into the bypass tray.
Bypass Reserve Settings for Bypass Tray
The document can be scanned in advance even when no tray or drawer contains
paper of the appropriate size.
After paper of the appropriate size is loaded into the bypass tray, the copy is printed.
