8
8.3 Job Control Screens
8-20
Managing Jobs Chapter 8
To combine jobs
1 Select the first job that you wish to combine with other jobs.
2 Select another job that you wish to combine with the first job selected.
❍ To combine more than two jobs, continue selecting all desired jobs.
❍ Up to five jobs can be selected.
❍ To change any of the copy settings, touch [Change Mode], and then change
the settings.
3 Touch [OK].
HDD Screen
✎
Condition
The HDD screen is only available if the optional hard disk is installed.
Touch [HDD]. The HDD screen (containing a list of jobs stored on the hard disk)
appears.
Jobs stored on the hard disk can be printed.
✎
Additional Information
If accounts have been specified from the Utility mode, the screen for entering
the account access code appears after [HDD] is touched. Using the keypad,
type in the 8-digit access code, and then touch [Enter].
✎
Reference
For details on setting the Scan to HDD functions, refer to the KM-C2230 Printer
Controller User’s Guide.
To return to the Basic screen, touch [Basic].
To delete a job, select the job, and then touch [Delete].
