Replace the battery in the Intelligent Key as fol-
lows:
1. Remove the mechanical key from the Intelli-
gent Key.
2. Insert a small screwdriver
᭺
A
into the slit
᭺
B
of the corner and twist it to separate the
upperpart fromthelower part.Use aclothto
protect the casing.
3. Replace the battery with a new one.
Recommended battery: CR2032 or equiva-
lent.
● Do nottouch theinternal circuit andelec-
tric terminals as doing so could cause a
malfunction.
● Hold the battery by the edges. Holding
the battery across the contact points will
seriously deplete the storage capacity.
● Make sure that the + side faces the bot-
tom of the case.
4. Close the lid securely as illustrated
᭺
C
᭺
D
.
5. Operate the buttons to checkthe operation.
See a NISSAN dealer if you need assistance for
replacement.
FCC Notice:
Changesor modificationsnot expresslyap-
proved by the party responsible for compli-
ance could void the user’s authority to op-
erate the equipment.
This device complies with Part 15 of the
FCC Rules and RSS-210 of Industry
Canada.
Operation is subject to the following two
conditions: (1) This device may not cause
harmful interference, and (2) this device
must accept any interference received, in-
cluding interference that may cause unde-
sired operation of the device.
WDI0568
8-24 Maintenance and do-it-yourself
