A SERVICE OF

logo

2. Rotate the cover in the direction shown,
disengaging the hinge at
1
and slide the
second pin from the hinge
2
and remove
the cover.
INSTALLING COVERS TO REAR
PARCEL SHELF
CAUTION
Make sure that the hinge is completely
aligned with the pin. If the pin is forced
into position, it may break.
Install the top tether anchor cover as follows:
1. Withthepin onone endkeptfree ofits hinge
1
, align the pin ofthe other end and slide it
into the hinge
2
.
2. With the first pin in position
2
, align the
second pin with its hinge slot
1
and push
down on the cover to completely engage it.
A snap sound will be heard.
LDI2010 LDI2011 LDI2012
Maintenance and do-it-yourself 8-31