Zone variation change procedure
The differencebetween magneticnorth andgeo-
graphical north is known as variance. In some
areas, this difference can sometimes be great
enough tocause false compass readings.Follow
these instructions to set the variance for your
particular location if this happens:
1. Press andhold the
button for about5
seconds. The current zone number will ap-
pear in the display. Release the button.
2. Find your current location on the zone map.
Refer to the illustration.
3. Press the
button repeatedly to toggle
through the zone numbers until the desired
number appears in the display. Once you
have selected a zone number, the display
will show a compass direction within a few
seconds.
NOTE:
Use zone number 5 for Hawaii.
Inaccurate compass direction:
The compass display is equippedwith automatic
correction function. If the correct direction is not
shown, follow this procedure.
WIC0355
Instruments and controls 2-7
