Dimension ES-3024 Ethernet Switch
Maintenance 17-3
Table 17-1 Maintenance
LABEL DESCRIPTION
Time Zone Select the time difference between UTC (Universal Time Coordinated, formerly known
as GMT, Greenwich Mean Time) and your time zone from the drop-down list box.
Click Apply to save your changes back to the switch or click Cancel to begin configuring this screen afresh.
17.2 Remote Management
Click Remote Management in the Maintenance screen to display the following screen.
A “secured client set” is a group of one or more “trusted computers” from which an administrator may use a
service to manage the switch. Configure “trusted computer(s)” for each service in the Remote Management
screen. Click Maintenance to return to the first Maintenance screen.
Figure 17-2 Remote Management
Table 17-2 Remote Management
FIELD DESCRIPTION
Index This is the client set index number. A “client set” is a group of one or more “trusted
computers” from which an administrator may use a service to manage the switch.
Active Yes indicates the client set is active and No indicates that it is not active.
Start Address The default value for a start and end address is 0.0.0.0, which means you don’t
care which host is trying to use a service/protocol.
End Address This field displays the end IP address in a range of client IP addresses that may
use the service(s) defined in the next field.
Telnet/FTP/Web/ICMP/SNMP Yes means that the specified service/protocol is enabled for this client set.
Similarly, No means it is not.
To edit a client set, click its client set index number.
