A SERVICE OF

logo

Dimension ES-3024 Ethernet Switch
23-10 IEEE 802.1Q Tagged VLAN
ras> sys sw vlan1q vlan status
This command displays the current configuration of the IEEE 802.1Q VLAN.
See the following example shows the default VLAN settings. The default VLAN allows all ports to connect to each
other and sets them to send untagged packets.
Figure 23-16 VLAN1Q Status Command Example
ras> sys sw vlan1q status
802.1Q VLAN Setup :
GVRP = Enable
Managament VLAN ID = 1