ZyXEL Communications ES-3024 Manual

A SERVICE OF

next previous

Dimension ES-3024 Ethernet Switch

3-8 Hardware Connections

Figure 3-9 Uplink Example

3.7 Configuring the ES-3024

You may use the embedded web configurator or command line interface to configure the ES-3024. If you’re using

the web configurator, you need Internet Explorer 5.5 and later or Netscape Navigator 6 and later.

You can access the command line interface using a terminal emulation program on a computer connected to the

switch console port (see section 3.1.1) or access the switch via an Ethernet port using Telnet.

When using the command line interface, you can only save STP, 802.1q and 802.1d

configurations using the “config save” command. All other configurations done using the

command line interface are effective only until you restart the switch.

The next part of this guide discusses configuring the ES-3024 using the web configurator.