Dimension ES-3024 Ethernet Switch
21-12 Commands Introduction
COMMAND DESCRIPTION
list
Lists all profiles in the internal
switch user database.
class
A class is the basic rule
parameters for a bandwidth
control, port mirror or port filter
rule.
display
Displays run-time bandwidth
control, port mirror and port filter
rule status.
l2set <src port> <src mac> <src
vid><dest port><dest mac> <dest
vid>
Sets source/destination port,
MAC address and VLAN group
information.
del <class id>
A class is automatically created
when you create a bandwidth
control, port mirror or port filter
rule. This command deletes the
specified class.
bmstorm
These commands relate to
broadcast storm control.
disable
Clears current run-time settings
type <type>
Specifies the type of frames to
limit in the switch; broadcast,
multicast or both.
basis <type>
Specifies whether frames are
limited in the switch on a per-
packet or per-Byte basis.
display [index]
Displays broadcast storm control
ports’ settings
interval [value]
Sets/displays the monitor
interval.
set
<port><threshold><direction>
Specifies the packet threshold
and direction (ingress/egress) on
the specified port.
del <index>
Disables broadcast storm control
on this port.
mac static
Displays static MAC addresses.
disable
Clears current run-time static
MAC address settings
display [port]
Displays current run-time static
MAC addresses on the specified
port.
set<port><mac
addr.><vid>
Configures a static MAC address
on the specified port.
