Dimension ES-3024 Ethernet Switch
22-2 Commonly Used Commands
ras> sys log clear
This command clears the system error log.
If you clear a log (using the log clear command), you cannot view it again.
22.2.3 Version Command
Syntax:
ras> sys version
This command shows the RAS code, firmware version, system uptime and bootbase version.
An example is shown next.
Figure 22-2 Version Command Example
22.2.4 Monitor Status Command
Syntax:
ras> sys monitor status
This command shows the hardware monitor’s status.
An example is shown next.
Figure 22-3 Monitor Status Command Example
22.2.5 Enabling RSTP on the Stacking Module
Step 1. First enable RSTP
sys sw rstp bridge enable
ras> sys version
ZyNOS version: V3.50(DS.0)b16 | 03/30/2003
romRasSize: 1638380
system up time: 29:15:35 (a0baac ticks)
bootbase version: V1.02| 02/26/2003
ras> sys monitor status
Time V0 V1 V2 V3 V4 T0 T1 T2 F10 F11
Err
or
---------- ------ ------ ------ ------ ------ ----- ----- ----- ----- ----- ---
-
----
160200 2.512 1.856 3.312 4.999 4.999 35.0 33.5 29.5 2909 3013
0000
0000
