Chapter 12 VLAN
MES-2110 User’s Guide
110
port. Click Configuration > VLAN Menu > Tag-Based > Management VLAN
to open the following screen.
Figure 45 Configuration > VLAN Menu > Tag-Based > Management VLAN
The following table describes the labels in this screen.
Table 37 Configuration > VLAN Menu > Tag-Based > Management VLAN
LABEL DESCRIPTION
Management VLAN This is the current management VLAN.
VLAN ID Enter an ID number from 1 to 4094. 1 is the default value. If you
change this, you will be disconnected from the web configurator
unless your current access belongs to the new VLAN.
Undo Click this to restore your last saved settings.
Apply Click Apply to save your changes to the MES-2110’s run-time
memory. The MES-2110 loses these changes if it is turned off or
loses power, so use the Save Settings link in the navigation
panel to save your changes to the non-volatile memory when you
are done configuring.
