A SERVICE OF

logo

Open as PDF
next previous
Chapter 4 Tutorials
MES-2110 User’s Guide
42
To configure MVR:
1 Open the Configuration > IGMP Menu > MVR screen.
2 Select Active to enable the MVR feature.
3 Enter StreamVlan as the MVR Name.
4 Enter 100 as the Multicast VLAN ID.
5 Set the MVR Mode to Dynamic.
6 In the Source Port column, deselect all ports except Port 9. This will be the
source port which receives all incoming multicasts from upstream.
7 In the Receiver Port column, select Ports 1-4 and Port 10. These ports are now
the designated downstream recipients for all incoming multicasts.
8 In the Tagging column, enable tagging for Port 9 and 10.
9 Click Apply to store these changes.
10 Click the Group Configuration link.
2
3
4
1
5
6
7
8
9
10