A SERVICE OF

logo

Open as PDF
next previous
MES-2110 User’s Guide
165
CHAPTER 22
Mgmt Config and System
Restart Menu
22.1 Overview
This chapter explains how to configure the screens that let you maintain the
firmware and configuration files.
22.2 The Serial Port Configuration Screen
Use this screen to view the parameters for local management. Configure a
computer’s terminal emulation software with the displayed parameters to manage
the MES-2110. Connect the male 9-pin end of the console cable to the console
port of the MES-2110. Connect the female end to a serial port (COM1, COM2 or
other COM port) of your computer.
Click Mgmt Config > Serial Port Config to open the following screen.
Figure 80 Mgmt Config > Serial Port Config
Specify the amount of time (in seconds) before the console session disconnects
automatically. If you set the timeout to 0 second, the console session never
expires. Click Apply to save your changes.