CL-6
C. Unit Start-Up (cont)
PRESS ESCAPE KEY TO DISPLAY ‘RSET’. PRESS DOWN ARROW KEY TO DISPLAY ‘SLCT’.
PRESS ENTER KEY.
RECORD CONFIGURATION INFORMATION BELOW:
SLCT (Heating Cooling Setpoint Select)
PRESS ESCAPE KEY SEVERAL TIMES TO GET TO THE MODE LEVEL (BLANK DISPLAY). USE THE
ARROW KEYS TO SCROLL TO THE SET POINT LED. PRESS ENTER TO DISPLAY SETPOINTS.
RECORD CONFIGURATION INFORMATION BELOW:
SETPOINT
USE ARROW/ESCAPE KEYS TO ILLUMINATE TEMPERATURES LED. PRESS ENTER TO DISPLAY
‘UNIT’. PRESS ENTER AND USE THE ARROW KEYS TO RECORD TEMPERATURES FOR T1 AND
T2 BELOW. RECORD T9 AND T10 IF INSTALLED. RECORD CONDENSER ENTERING AND LEAVING
FLUID TEMPERATURES IF INSTALLED. PRESS ESCAPE TO DISPLAY ‘UNIT’ AGAIN AND PRESS
THE DOWN ARROW KEY TO DISPLAY ‘CIR.A’. PRESS ENTER AND USE THE ARROW KEYS
TO RECORD TEMPERATURE FOR T3 (30GTN,R ONLY). USING A DC VOLTMETER, MEASURE
AND RECORD THE VOLTAGE FOR EACH THERMISTOR AT THE LOCATION SHOWN. FOR MODELS
WITH QUICKSET, RECORD THE TEMPERATURES ACCORDING TO THE DC VOLTAGES USING
TABLES 32A-33B.
ITEM DESCRIPTION STATUS UNITS VALUE
CLSP
Cooling Setpoint Select 0 = Single
1 = Dual Switch
2 = Dual Clock
3 = 4 to 20 mA Input
4 = 4-20 mA Input
5 = External Setpoint Potentiometer
HTSP
Heating Setpoint Select 0 = Single
1 = Dual Switch
2 = Dual 7 day schedule
3 = Dual CCN occupancy
4 = 4-20 mA Input
5 = Setpoint Potentiometer
RL.S
Ramp Load Select Enable/Disable
CRMP
Cooling Ramp Loading 0.2 to 2.0
HRMP
Heating Ramp Loading 0.2 to 2.0
HCSW
Heat Cool Select Cool/Heat
Z.GN
Deadband Multiplier 1.0 to 4.0
SUB-MODE ITEM DESCRIPTION STATUS UNITS VALUE
COOL
CSP.1 Cooling Setpoint 1 –20 to 70 °F
CSP.2 Cooling Setpoint 2 –20 to 70 °F
CSP.3 Cooling Setpoint 3 –20 to 32 °F
HEAT
HSP.1 Heating Setpoint 1 80 to 140 °F
HSP.2 Heating Setpoint 2 80 to 140 °F
HEAD
HD.P.A Head Pressure Setpoint A 80 to 140 °F
HD.P.B Head Pressure Setpoint B 80 to 140 °F
TEMPERATURE VDC BOARD LOCATION
T1 (CLWT) MBB, J8 PINS 13,14
T2 (CEWT) MBB, J8 PINS 11,12
T3 (SCT.A) MBB, J8 PINS 21,22
T9 (OAT) MBB, J8 PINS 7,8
T10 (SPT) MBB, J8 PINS 5,6
(CNDE) MBB, J8 PINS 1,2
(CNDL) MBB, J8 PINS 3,4
