A SERVICE OF

logo

Chapter 2 Printing Tasks 102
Selecting the Output Bin
How to Configure the Operating Modes
The network or printer administrator chooses the mode of operation through
the control panel or through an HP network configuration utility, such as
HP JetAdmin or HP LaserJet Utility. You will need to set up your printer driver
to reflect the mode chosen by the administrator.
Bidirectional Environment
The printer automatically selects the mode established by the network
administrator.
Continued on next page.
Stacking This mode stacks the printed output from the lowest bin to the top,
regardless of job boundaries. This mode of operation takes
advantage of the total capacity of the mailbox bins. The device is
seen by the software as one logical bin.
Operating Modes (continued)