Chapter 5 Problem Solving 203
Understanding Printer Messages
ENV FEEDER LOAD
[TYPE] [SIZE]
Load the requested envelope type and size into the envelope feeder.
Make sure the envelope size and type are set correctly from the
Paper Handling Menu in the printer’s control panel (page 360
).
Press G
O
if the desired envelope is already loaded in the feeder.
Press - V
ALUE
+ to scroll through the available types and sizes. Press
S
ELECT
to accept the alternate type or size.
EXTERNAL DEVICE
INITIALIZING
When an external paper handling device is connected to the printer,
it must have 10 seconds to initialize after boot or after coming out of
Power Save mode.
FINISHER LOW ON
FINISHING AGENT
The finishing device is running out of its finishing material and
needs to be refilled.
FLASH DEVICE
FAILURE
The flash DIMM had a critical failure and no longer can be used.
Remove the flash DIMM and replace it with a new one.
FLASH FILE
OPERATION FAILED
The requested operation could not be performed. You might have
attempted an illegal operation, such as trying to download a file to a
non-existent directory.
Printer Messages (continued)
Message Explanation or Recommended Action
