Chapter 18 SNMP
GS-1524/GS-1548 User’s Guide
109
18.2.1 SNMP Group: Create
Use the SNMP Group: Create screen to add an SNMP group. Click on the Create
New Group link in the SNMP Group screen. The screen displays as shown.
Figure 62 SNMP Group: Create
The following table describes the labels in this screen.
Access This field indicates the rights this group has for SNMP management. “R”
indicates that this group has read rights and “W” indicates ‘Write’
meaning that you can edit the MIBs on the Switch.
Previous
Page/ Next
Page
Use these navigation links to browse all of your SNMP groups.
Table 41 SNMP Group (continued)
LABEL DESCRIPTION
Table 42 SNMP Group: Create
LABEL DESCRIPTION
Group Name Specify the name for this SNMP group. You can use 1-33 printable
characters. Spaces are allowed.
SNMP Version Specify the SNMP version this group uses to manage the Switch.
Authenticatio
n
This field is only editable if you select SNMPv3 in the SNMP Version
field. Select Enabled to force SNMP v3 groups to authenticate with the
Switch or select Disabled to deactivate authentication for the SNMP v3
groups. For SNMP v1 and SNMP v2c authentication is always disabled.
Access Read - select Enabled to allow this group to collect information from this
Switch.
Write - select Enabled to allow this group to create or edit MIBs.
Create Click this to add this SNMP group to the Switch.
Note: A maximum of ten groups can be created on the Switch.
Cancel Click this to go back to the main SNMP Group screen without saving
your changes.
