A SERVICE OF

logo

Open as PDF
next previous
GS-1524/GS-1548 User’s Guide
49
CHAPTER 6
Port Settings
This chapter describes how to view and configure the port settings on the Switch.
6.1 Port Status
Use this screen to view Switch port settings. Click Port in the navigation panel to
display the Port Status screen.
Figure 29 Port Status
The following table describes the labels in this screen.
Table 8 Port Status
LABEL DESCRIPTION
Refresh Click this to update the PORT Status screen.
Port This identifies the Ethernet port. Click a port number to display the Port
Configuration screen (refer to Section 6.2 on page 50).
Link Status This field displays the link status of the port. Up, if the port is enabled and
active or Down, if the port is disabled or not connected to any device.
Speed Duplex This field displays the speed either 10Mbps, 100Mbps or 1000Mbps
and the duplex mode Full or Half.