Chapter 17 Event Logging
GS-1524/GS-1548 User’s Guide
99
17.3 Logging: Add Server
Use this screen to configure a new syslog entry. Click Add Server in the Logging
screen to view the screen as shown.
Figure 55 Logging: Add Server
The following table describes the labels in this screen.
17.4 Viewing RAM and Flash Logs
Use these screens to view or export RAM or Flash logs.
Click RAM Logs or Flash Logs in the navigation panel to view the Logs - RAM
or Logs - Flash screen.
Table 34 Logging: Add Server
LABEL DESCRIPTION
Name Enter a short descriptive name for identifying this server. You can use 1-
12 printable ASCII characters. Spaces are allowed.
IP Address Enter the IP address in dotted decimal notation of the syslog server you
want to add.
Port Specify the UDP port for sending log messages to this server. Typically
port 514 is used with syslog.
Facility The log facility allows you to send logs to different files in the syslog
server. Refer to the documentation of your syslog server for more details.
Add Click Add to save this entry to the Switch and return to the Logging
screen.
