Chapter 18 SNMP
GS-1524/GS-1548 User’s Guide
119
18.6.1 SNMP Trap Station: Create
Click on the Create New Trap Station link in the SNMP Trap Station screen to
add an SNMP Trap Station. The screen displays as shown.
Figure 72 SNMP Trap Station: Create
The following table describes the labels in this screen.
18.6.2 SNMP Trap Station: Modify
Click on the Trap Station ID number or select a Trap Station ID from the Trap
Station ID drop down list box in the SNMP Trap Station screen to modify the
settings of an existing trap station.
Figure 73 SNMP Trap Station: Modify
Table 52 SNMP Trap Station: Create
LABEL DESCRIPTION
Remote IP
Address
Enter the IP address of the remote trap station in dotted decimal
notation.
Community
String
Specify the community string used with this remote trap station.
Create Click this to add this SNMP user to the Switch.
Cancel Click this to go back to the main SNMP Group screen without saving
your changes.
