A SERVICE OF

logo

Chapter 5 System
GS-1524/GS-1548 User’s Guide
47
5.2 System: Change Password
Use the Change Password screen to change the administrator username and
password for the Switch. Click System > Password to view the screen as shown.
Figure 26 System: Password
The following table describes the labels in this screen.
5.3 Firmware Upgrade
Make sure you have downloaded (and unzipped) the correct model firmware and
version to your computer before uploading to the device.
Be sure to upload the correct model firmware as uploading the
wrong model firmware may damage your device.
Table 7 Change Password
LABEL DESCRIPTION
Old Password Type the existing system password (1234 is the default password when
shipped).
New Password Enter your new system password. Enter up to 15 alpha-numeric
characters; spaces are allowed.
Confirm New
Password
Retype your new system password for confirmation