Chapter 12 Port Rate Limit and Storm Control
GS-1524/GS-1548 User’s Guide
78
The following table describes the related labels in this screen.
12.1.1 Rate Limit Screen
Click a port number in the Port Rate screen to bring up the screen as shown next.
Figure 45 Rate Limit Configuration
The following table describes the related labels in this screen.
Table 22 Rate Limit and Storm Control
LABEL DESCRIPTION
Port This field displays the port number. Click on an individual port number to
configure rate limits on that port.
Ingress
Rate
Displays the maximum bandwidth allowed in kilobits per second (Kbps) for
the incoming traffic flow on a port.
Egress Rate Displays the maximum bandwidth allowed in kilobits per second (Kbps) for
the out-going traffic flow on a port.
Table 23 Rate Limit Configuration
LABEL DESCRIPTION
Ingress
Rate
Specify the maximum bandwidth allowed in kilobits per second (Kbps) for
the incoming traffic flow on a port.
Egress
Traffic
Shaping
Select Disabled to not have any bandwidth limits for outgoing traffic on
the port or select Enabled to enable bandwidth limits for outgoing traffic
on the port.
Rate This is a read only field indicating the rate limit of outgoing traffic on the
port in Kbps. This value changes depending on the number of Tokens
Added Per Interval.
