Chapter 18 SNMP
GS-1524/GS-1548 User’s Guide
118
to enable the sending of SNMP traps to a remote SNMP management station(s).
Click SNMP > Trap Station to view the screen as shown.
Figure 71 SNMP Trap Station
The following table describes the labels in this screen.
Table 51 SNMP Trap Station
LABEL DESCRIPTION
Trap Station
ID
Select the SNMP trap station you want to edit.
Create New
Trap Station
Click this to configure a new SNMP Trap Station.
Trap Station
ID
This field indicates the trap station number. It is used for identification
only. Click on the individual trap station number to edit the trap station
settings.
Remote IP
Address
This field displays the IP address of the remote SNMP management
station.
Community
String
An SNMP community string is a text string that acts as a password. It is
used to authenticate messages that are sent between the management
station (the SNMP manager) and the device (the SNMP agent). The
community string is included in every packet that is transmitted between
the SNMP manager and the SNMP agent.
This field displays the community string of this remote trap station.
Previous
Page/ Next
Page
Use these navigation links to browse all of your SNMP groups.
