Chapter 19 RMON-Lite
GS-1524/GS-1548 User’s Guide
131
Note: The RMON Alarm: Modify screen contains the same fields as the RMON
Alarm: Create New Alarm screen in the following figure.
Figure 81 RMON Alarm: Create New Alarm
The following table describes the labels in this screen.
Table 61 RMON Alarm: Create New Alarm
LABEL DESCRIPTION
RMON MIB
Table:
Use this drop down list box to select the MIB table you want to view. Click
Apply to refresh the screen to the selected MIB table view.
Index This field displays the index number of this alarm entry.
Interface Select the port which is monitored for this alarm.
Counter Select the data which is used to test if this alarm is triggered, the choices
are Drop Events, Octets, Packets and so on.
Sample Type Select the method of obtaining the sample value. Choices are Absolute
and Value.
Startup Alarm Select the startup alarm type (Rising Threshold, Falling Threshold,
Rising Or Falling Threshold).
Rising
Threshold
Specify a rising threshold (between 0 and 2147483647). When a value is
greater or equal to this threshold, the probe triggers an alarm.
Falling
Threshold
Specify the falling threshold (between 0 and 2147483647). When a value
is smaller or equal to this threshold, the probe triggers an alarm.
Rising Event Select an index number of a rising event.
Falling Event Select an index number of a falling event.
Owner Enter a descriptive name of the application that creates this entry. You
can use 1-64 printable ASCII characters. Spaces are not allowed.
