Chapter 18 SNMP
GS-1524/GS-1548 User’s Guide
112
18.3.1 SNMP User: Create
You must configure an SNMP group first before you can create an SNMP user. Click
on the Create New User link in the SNMP User screen to add an SNMP user. The
screen displays as shown.
Figure 65 SNMP User: Create
The following table describes the labels in this screen.
Table 45 SNMP User: Create
LABEL DESCRIPTION
User Name Specify the name for this SNMP user. You can use 1-33 any printable
character. Spaces are allowed
Group Name Specify the SNMP group this user belongs to.
SNMP Version Specify the SNMP version this group uses to manage the Switch.
Auth Type Authentication can only be configured for SNMP v3.
Select None to allow this user to manage the Switch without
authentication or select MD5 and configure the Key field to force this
user to authenticate with the Switch.
Key Enter the MD5 key this user must use to authenticate with the Switch.
You can use 1-8 printable ASCII characters. Spaces are allowed but
trailing spaces are truncated.
Create Click this to add this SNMP user to the Switch.
Cancel Click this to go back to the main SNMP Group screen without saving
your changes.
