A SERVICE OF

logo

Chapter 18 Port Authentication
GS2200-8/24 User’s Guide
150
Multi-Secure
Num
If you set Host-mode to Multi-Secure, specify the maximum number of users (between
1 and 9) that the Switch will authenticate on this port.
Apply Click Apply to save your changes to the Switch’s run-time memory. The Switch loses these
changes if it is turned off or loses power, so use the Save link on the top navigation panel
to save your changes to the non-volatile memory when you are done configuring.
Cancel Click Cancel to begin configuring this screen afresh.
Table 46 Advanced Application > Port Authentication > 802.1x > Guest VLAN (continued)
LABEL DESCRIPTION