Chapter 2 Hardware
V300 User’s Guide
35
Press the MUTE key once to mute a call. Press it a second time to return to the call.
2.2.6 Placing a Call on Hold
When you place a call on hold, you neither receive nor transmit a signal. If your phone system
is configured to use the Music on Hold feature, the person on the other end of the line hears the
preconfigured music (or other audio). Otherwise, they hear nothing.
Press the HOLD key once to place a call on hold. Press it a second time to return to the call.
2.2.7 Using Voicemail
Once you have configured your SIP account’s voicemail number on the V300, you can press
the VOICEMAIL key to check your messages.
Use the VoIP > SIP > SIP Settings screen to set the voicemail account number. See Section
10.2.1 on page 85 for more information.
2.2.8 Making Conference Calls
Take the following steps to make a three-way conference call.
1 Either start a call, or receive a call. Make sure you know which line the call is using.
2 Ensure the call is active (you can talk with the other person). Press the Conference key.
This “marks” the first call you want to mix into the conference call.
3 Select another line. You can either receive an incoming call, make another outgoing call,
or resume an existing call that you previously put on hold.
4 Ensure the call is active and press the Conference key again. The three-way conference
call begins. All three parties can talk with one another.
" Do not press any other keys between step 2 and step 3. If you do, you will
have to start again.
" You cannot have a conference call and a transferred call ongoing at the same
time.
2.2.9 Transferring a Call
Take the following steps to transfer an ongoing call to another phone number.
1 During the ongoing call, press the Transfer key.
2 The next available line automatically activates. Ensure you can hear a dial tone.
3 Dial the number to which you want to transfer the call.
4 To transfer the call, either:
