Chapter 9 Network Setup
V300 User’s Guide
77
Figure 63 Network > Internet Connection
The following table describes the labels in this screen.
9.3 Management Port
Use this screen to configure the management IP address of the V300. You can use this IP
address to connect to the V300 even when its WAN IP address is in a different subnet. Your
computer must be in the same subnet as the management IP address to use it.
Table 20 Network > Internet Connection
LABEL DESCRIPTION
Ethernet TCP/IP Settings
Get
automatically
from DHCP
Select this option if your ISP did not give you an IP address.
Use Fixed IP
Address
Select this option If your ISP assigned a fixed IP address. Enter the address
information in the following fields.
IP Address Enter your WAN IP address in this field if you selected Use Fixed IP Address.
IP Subnet Mask Enter the IP Subnet Mask in this field.
Gateway IP
Address
Enter a Gateway IP Address (if your ISP gave you one) in this field.
Primary DNS
Secondary DNS
Enter the DNS (Domain Name Service) servers, if provided by your ISP.
PPPoE
Use PPPoE
Client
Select this if your V300 is a PPPoE client.
PPPoE User
Name
Type the user name given to you by your ISP.
Password Type the password associated with the user name above.
Apply Click this to save your changes.
Reset Click this to reload the previous configuration for this screen.
