Chapter 6 LCD Menus: Advanced
V300 User’s Guide
50
" Once you have configured the fields in these menus with the correct
information, the V300 must register with the SIP server. You may need to
restart the V300 to do this.
" Enter information in these menus exactly as you received it from your VoIP
service provider. If you were not given information for any menu or field, leave
it at its default setting.
Select Adv Setting > VoIP1 or VoIP2 and press . The following screen displays.
Figure 25 LCD Menu: VoIP
See the following sections for more information on each menu in this screen.
6.2.1 SIP Active
Select this to see whether the SIP account is turned on (On) or off (Off). Press again to
change the setting.
When the account is not active, you cannot use it to make or receive calls on the V300.
6.2.2 SIP Number
Use this to see and edit the SIP number for your SIP account.
1. SIP1 Active
On
Table 11 LCD Menu: SIP Account Configuration
SIP Active see Section 6.2.1 on page 50
SIP Number see Section 6.2.2 on page 50
Serv Addr see Section 6.2.3 on page 51
Serv Port see Section 6.2.4 on page 52
Reg Addr see Section 6.2.5 on page 52
Reg Port see Section 6.2.6 on page 53
Domain see Section 6.2.7 on page 54
User ID see Section 6.2.8 on page 54
Password see Section 6.2.9 on page 55
