Chapter 6 LCD Menus: Advanced
V300 User’s Guide
53
The IP address of the SIP register server already configured on the V300 displays. If no IP
address is already configured, none displays. Press to edit the SIP register server address, or
press to return to the previous screen.
6.2.5.1 SIP Register Server - Edit
Press in the Reg Addr screen. The following screen displays.
Figure 33 LCD Menu: SIP Register Server Address - Edit
Use PHONEBOOK to clear the previously-saved settings if any. Enter the new SIP register
server address and press to save the change. Alternatively, press to return to the previous
screen.
6.2.6 SIP Register Port
Use this screen to see and edit the listening port on the SIP register server for calls from this
account. Select Adv Setting > VoIP1 or VoIP2 > Reg Port. The following screen displays.
Figure 34 LCD Menu: SIP Register Port
This screen displays the SIP register server port number on the V300. The default is 5060.
Press to edit the SIP register server port number, or press to return to the previous screen.
" Make no changes in this screen unless your service provider told you to.
6.2.6.1 SIP Register Port - Edit
Press in the Reg Port screen. The following screen displays.
Figure 35 LCD Menu: SIP Register Port - Edit
Use PHONEBOOK to clear the previously-saved settings if any. Enter the new SIP server
port number (from 1024 to 65535) and press to save the change. Alternatively, press to
return to the previous screen.
" The port number can consist of numerals (0 ~ 9) only.
5. Reg Addr
_
6. Reg Port
5060
6. Reg Port
5060_
