Chapter 3 Using the LCD Screen
V300 User’s Guide
41
3.4 LCD Menu Overview
This section shows the LCD menus, and describes what you can do with each.
Press the Navigator up or down to access the V300’s LCD menu system.
KEY
1 1 [NONE] [NONE] ! | #
22 A B C a b c : ; “
3 3D E Fd e f / \ ?
4 4 G H I g h i @ % &
5 5 J K L j k l . ‘ ,
6 6 M N O m n o + ^ =
7 7 P Q R S p q r s ~ - _
8 8 T U V t u v ( )
9 9 W X Y Z w x y z < >
* . .. $ *
0 0 [NONE] [NONE] [SPACE]
# [CYCLE MODE]
Table 6 Keypad Characters
Table 7 LCD Menu Overview
MENU DESCRIPTION
Phonebook Use this menu to view details of your contacts.
Volume Setting Speaker Volume Use this menu to set the loudness of the internal speaker.
Phone Volume Use this menu to set the loudness of the V300’s handset.
Ring Volume Use this menu to set the loudness of the V300’s ringtone.
Headset Volume Use this menu to set the loudness of an external headset you
plug into the V300.
System Info IP Address Use this to see the IP address, subnet mask, gateway and
DNS settings currently assigned to the V300.
Subnet Mask
Gateway
1st DNS
2nd DNS
F/W Version Use this to see the version number of the firmware the V300 is
currently using.
Advanced Setting VoIP1 Use this to set up the first Voice over Internet (VoIP) account.
VoIP2 Use this to set up the second Voice over Internet (VoIP)
account.
DHCP Use this menu to have the V300 get an IP address
automatically.
Static IP Use this menu to give your V300 an IP address.
PPPoE Use this menu to configure your PPPoE username and
password, if provided by your Internet Service Provider or
network administrator.
