V300 User’s Guide
49
CHAPTER 6
LCD Menus: Advanced
This chapter discusses using the V300’s LCD menus to do the following things:
• Set up your VoIP (SIP) account on the V300 - see Section 6.2 on page 49.
• Set up your V300’s IP address - see Section 6.4 on page 56 and Section 6.3 on page 55.
• Set up PPPoE (Point-to-Point Protocol over Ethernet) - see Section 6.5 on page 58.
6.1 The Advanced Setting Menu
Press MENU to access the LCD screen menu system, select Advanced Setting and press .
The following screen displays.
Figure 24 LCD Menu: Advanced Setting
The following table describes the labels in this screen.
See the rest of this chapter for information on each of these menus. For background
information, see the relevant chapter in the web configurator section of this User’s Guide.
6.2 The VoIP Menus
Use these menus to set up your V300 to set up and use a Voice over Internet (VoIP) account.
4. Setting
1. VoIP1
Table 10 Advanced Setting Menu
LABEL DESCRIPTION
VoIP1 Use this to set up the first VoIP (SIP) account.
VoIP2 Use this to set up the second VoIP (SIP) account.
DHCP Use this to enable DHCP if you do not have an IP address to use for the
V300. The V300 obtains an address automatically from a DHCP server on
the network.
Static IP Use this if you have an IP address to use for the V300.
PPPoE Use this to configure the V300’s PPPoE username and password, if it is a
PPPoE client.
