A SERVICE OF

logo

Chapter 23 Authentication & Accounting
GS2200-48 User’s Guide
192
23.1.2 on page 192) as external authentication, authorization and accounting
servers.
Figure 89 AAA Server
23.1.1 Local User Accounts
By storing user profiles locally on the Switch, your Switch is able to authenticate
and authorize users without interacting with a network AAA server. However, there
is a limit on the number of users you may authenticate in this way (See Chapter
32 on page 279).
23.1.2 RADIUS and TACACS+
RADIUS and TACACS+ are security protocols used to authenticate users by means
of an external server instead of (or in addition to) an internal device user database
that is limited to the memory capacity of the device. In essence, RADIUS and
TACACS+ authentication both allow you to validate an unlimited number of users
from a central location.
The following table describes some key differences between RADIUS and
TACACS+.
23.2 Authentication and Accounting Screens
To enable authentication, accounting or both on the Switch. First, configure your
authentication server settings (RADIUS, TACACS+ or both) and then set up the
authentication priority and accounting settings.
Client AAA Server
Table 61 RADIUS vs TACACS+
RADIUS TACACS+
Transport
Protocol
UDP (User Datagram Protocol) TCP (Transmission Control Protocol)
Encryption Encrypts the password sent for
authentication.
All communication between the client
(the Switch) and the TACACS server
is encrypted.