Chapter 4 The Web Configurator
GS2200-48 User’s Guide
45
The following table describes the links in the navigation panel.
Table 6 Web Configurator Screen Sub-links Details
BASIC
SETTING
ADVANCED APPLICATION IP APPLICATION MANAGEMENT
IP Source Guard
IP Source Guard Static
Binding
DHCP Snooping
- DHCP Snooping
Configure
-- DHCP Snooping Port
Configure
-- DHCP Snooping VLAN
Configure
ARP Inspection Status
- ARP Inspection VLAN
Status
- ARP Inspection Log
Status
- ARP Inspection Configure
-- ARP Inspection Port
Configure
-- ARP Inspection VLAN
Configure
Loop Guard
Table 7 Navigation Panel Links
LINK DESCRIPTION
Basic Settings
System Info This link takes you to a screen that displays general system and
hardware monitoring information.
General Setup This link takes you to a screen where you can configure general
identification information and time settings for the Switch.
Switch Setup This link takes you to a screen where you can set up global Switch
parameters such as VLAN type, MAC address learning, IGMP snooping,
GARP and priority queues.
IP Setup This link takes you to a screen where you can configure the IP address,
subnet mask (necessary for Switch management) and DNS (domain
name server) and set up to 64 IP routing domains.
Port Setup This link takes you to screens where you can configure speed, flow
control and priority settings for individual Switch ports.
Advanced Application
VLAN This link takes you to screens where you can configure port-based or
802.1Q VLAN (depending on what you configured in the Switch Setup
menu). You can also configure a protocol based VLAN or a subnet based
VLAN in these screens.
Static MAC
Forwarding
This link takes you to screens where you can configure static MAC
addresses for a port. These static MAC addresses do not age out.
Filtering This link takes you to a screen to set up filtering rules.
Spanning Tree
Protocol
This link takes you to screens where you can configure the RSTP/MSTP
to prevent network loops.
