Chapter 7 Basic Setting
GS2200-48 User’s Guide
64
7.2 System Information
In the navigation panel, click Basic Setting > System Info to display the screen
as shown. You can check the firmware version number and monitor the Switch
temperature, fan speeds and voltage in this screen.
Figure 24 Basic Setting > System Info
The following table describes the labels in this screen.
Table 10 Basic Setting > System Info
LABEL DESCRIPTION
System
Name
This field displays the descriptive name of the Switch for identification
purposes. You can configure this name in the Basic Setting > General
Setup screen.
Product
Model
This field displays the model name of the Switch.
ZyNOS F/W
Version
This field displays the version number of the Switch 's current firmware
including the date created.
Ethernet
Address
This field refers to the Ethernet MAC (Media Access Control) address of the
Switch.
Hardware Monitor
Temperature
Unit
The Switch has temperature sensors that are capable of detecting and
reporting if the temperature rises above the threshold. You may choose
the temperature unit (Centigrade or Fahrenheit) in this field.
