A SERVICE OF

logo

Chapter 25 Loop Guard
GS2200-48 User’s Guide
233
port N. The Switch will shut down port N if it detects that the probe packet has
returned to the Switch.
Figure 111 Loop Guard - Network Loop
Note: After resolving the loop problem on your network you can re-activate the
disabled port via the web configurator (see Section 7.7 on page 73) or via
commands.
25.2 Loop Guard Setup
Click Advanced Application > Loop Guard in the navigation panel to display the
screen as shown.
Note: The loop guard feature can not be enabled on the ports that have Spanning
Tree Protocol (RSTP or MSTP) enabled.
Figure 112 Advanced Application > Loop Guard
A
P
P
N
P