AEM 3945-B Manual

A SERVICE OF

next previous

32

Power Quality Analyzer Model 3945-B

4.1.8 Recording

• Highlight RECORDING with the

buttons, then press the button.

 Thefollowingscreenwillappear:

SET-UP

Hz

Figure 4-5

• Four recording set-ups are available.

• Chooserecordingconguration1,2,3,or4withthe

buttons.

• Next,movethroughthechoiceswiththe

buttons and select the desired

parameters with the

buttons.

As you move through the parameters, each choice, in turn, will be highlighted.

• To activate the selected parameter for recording, use the

buttons.

 Theselectedparameterswillhavealledin and those not selected will have

anunlled .

• Therearetwouser-denedparametersatthebottomofthewindow.Atrst,

they will be listed as a question mark “?”. These parameters allow you to moni-

torspecic,orarange,ofvoltage,currentorpowerharmonics.

 Toactivatetheseparameters:

- Use the

buttons to select the parameter.

- Nextusethe

buttons to scroll through the available choices.

 Theseare:Uh,Vh,Ah,andVAh.

- Once the desired parameter is selected, use the

tomovetotherst

modiableeldforthisparameter.Avaluefrom00to50maybeselected

forthiseldusingthe

buttons.

- After selecting the desired harmonic order for the beginning value, press

the

button to move to the upper value. Use the same process to select

the upper limit.

If these options are not

selected, all the harmonics

(oddandeven)willbe

recorded.