70
Power Quality Analyzer Model 3945-B
NOTE: The instrument must be configured for the same communications rate
specified in Figure 6-6. If it is not, then you must either select the corresponding
rate or change the instrument’s rate.
When a serial communication link is established, DataView
®
will automatically
identify the instrument that it is connected to. A status screen will then appear as
shown below.
Figure 6-7
Thisscreenshows:
• The status of PowerPad
®
• If DataView
®
is connected to the PowerPad
®
• The communications port and speed of the connection
• Themodelnumber,serialnumber,andrmwarerevision
• The battery charge level, whether the battery is charging or discharging,
and the time on the clock
• If a recording is in progress and when it is scheduled to end
• If a delayed recording is scheduled and when it is scheduled to begin
• Real-time waveforms and trend information from the PowerPad
®
If the indicated items are not shown on the screen, select Restore Default Layout
from the Window menu.
NOTE: If the battery charge is shown to be unknown, plug the PowerPad
®
into AC
Power, when it reaches 100% charge, the display should again be able to show
the battery charge.
