A SERVICE OF

logo

74
Power Quality Analyzer Model 3945-B
Duration: The Alarm will only be recorded if the duration of the parameter meeting
thethresholdcriteriaexceedstheduration.Theminimumalarmdurationcanbein
minutes or seconds. In the case of Vrms, Urms or Arms not using neutral current,
can also be in hundredths of a second.
For Vrms, Urms, and Arms, it can be useful to set a duration of 0 seconds. In that
caseaneventasshortasahalfcyclecanbedetected(8millisecondsat60Hz).
For all other parameters, the minimum duration that can be detected is 1 second.
NOTE: You can check for alarms, records and search for transients at the same
time.
NOTE: Alarms are not stored if the PowerPad is turned off.
6.6.5 Recordings Configuration
TheRecordingwindowshowsthedialogboxusedtoconguretheparametersfor
a recording session.
Figure 6-11
Fourdifferentcongurationsareavailable.Morecongurationscanbesavedby
pressing “Save to File” and recalled later by pressing “Load From File”.