Chapter 7 LCD Menus: Advanced
V500 Series User’s Guide
109
7.3.2 Static IP
Use this menu to manually configure your V500’s IP address, subnet mask and gateway
settings. Enter the settings exactly as your ISP or network administrator gave them to you.
Enable and select Advanced Setting > Network Setting > Static IP. The following screen
displays.
Figure 59 LCD Menu: Static IP
The following table describes the labels in this screen.
Static IP
1 IP Address
2 Default Gateway
3 Subnet Mask
4 1st DNS
5 2nd DNS
Select Back
Table 37 LCD Menu: Static IP
LABEL DESCRIPTION
IP Address Select this to set the static IP address you want the V500 to use.
Default Gateway Select this to set the IP address of the device your V500 uses to access the
Internet.
Subnet Mask Select this to enter the subnet mask your V500 uses.
1st DNS Select this to enter the primary DNS (Domain Name System) server’s IP
address.
2nd DNS Select this to enter the secondary (backup) DNS server’s IP address.
Select Press this to choose the highlighted field in the menu.
Back Press this to return to the previous screen.
