Chapter 7 LCD Menus: Advanced
V500 Series User’s Guide
132
The following table describes the labels in this screen.
7.4.11 Codec Priority
When the V500 makes a SIP call, it negotiates the voice codec (coder / decoder) it uses for the
call with the SIP server. Both devices must be able to use the same codec. You can set two
codecs for the V500 to use. If the SIP server cannot use the first codec you set, the V500 tries
to use the second codec. If the SIP server can use neither the first codec nor the second, the
V500 tries to use the third.
" Make no changes in this screen unless your service provider told you to.
Select Advanced Setting > SIP Configuration > SIP (1 ~ 4) Configuration > Codec
Priority. The following screen displays.
Figure 89 LCD Menu: Codec Selection
Table 66 LCD Menu: Authentication Password - Edit
LABEL DESCRIPTION
Current This shows the SIP authentication ID already configured for this account.
Each asterisk (*) represents one character of the password configured on
the V500.
New Enter the new password for this account.
Confirm Re-enter the new password.
Mode Cycle through different character input modes using the # key.
Save Press this to save your changes.
<- Press this to delete a character.
Cancel Press this to return to the previous screen without saving your settings.
Codec Priority
1 1st G.711 a law
2 2nd G.729
3 3rd G.711 u law
Apply Change Back
