A SERVICE OF

logo

Open as PDF
next previous
Chapter 10 Network Setup
V500 Series User’s Guide
176
10.3 Management Port
Use this screen to configure the management IP address of the V500. You can use this IP
address to connect to the V500 even when its WAN IP address is in a different subnet. Your
computer must be in the same subnet as the management IP address to use it.
Click Network > Ethernet > Mgnt Port. The following screen displays.
Figure 130 Network > Mgnt Port
The following table describes the labels in this screen.
Table 105 Network > Mgnt Port
LABEL DESCRIPTION
Management IP Address
IP Address Enter the new management IP address you want the V500 to use.
Apply Click this to save your changes.
Reset Click this to reload the previous configuration for this screen.